TPU Hot Melt Adhisive Film

  #J865-PA #J875-PA
Function: Anti-UV ester Anti-UV ester
Color: Clear, slight amber color Clear, amber color
Width: 40" 40"
Thickness: 0.05 - 0.15 m/m 0.05 - 0.15 m/m
Weight: 1.19 g/cm3 1.20 g/cm3
Hardness (shore A): 78 97
Tensile Strength (%): 700 950
Elongation: 120-160 ºC 60-90 ºC
Tear Strength: > 145 ºC > 80 ºC
Melting Range: 90 ºC 50 ºC
Welding Method:
Radio Frequency, Ultrasonic, Hot Air Blower, Iron, Stamer Laminataed, Hot roller Laminated.
Home washing and dry cleaning, excellent
With release paper, 100 yds per roll.
Pre-slitted on special request minimum width 15mm.
Many materials, including TPU, PU Foam, PVC, ABS, Leather, Paper and Fabrics: Nylon, Polyester, Cotton, Silk, Wool, Rayon, Label, Logo, ...etc.

Important Notice to Purchaser

All Statements, technical advice and recommendations contained herein are based on tests believed to be reliable, but the accuracy thereof is not guaranteed, and the following is made in lieu of all warranties, expressed or implied: seller's and manufacturer's only obligation shall be to replace the quantity of product proved to be defective. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, user shall determine the suitability of the product for his intended use, and user assumes all risk and liability whatsoever in connection therewith. No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by officers of seller and manufacturer. Once again: customer must pretest and determine the suiability of the products.